Ways To Resolve HP Printer Error Code 59.F0
HP printer is known for the best printing machine that has many features. Due to its best features, most people prefer it. Through the help of this printing machine, you can easily print out your important documents without any difficulty if you have any issues related to this printing device so you can take the help of professionals. Many users ask how to solve HP printer error code 59.F0. If you are suffering from this type of issue, so you don’t need to worry.
This error happens when there is an issue in the internal motor of the printing device. The main reason behind this error is the failure of transfer alienation, which means a situation where the ITB is stuck and cannot rotate. Another cause behind this error is the problem with the SR9 sensor that plays a vital role in the transfer roller disengagement sensor. In this case, you need to apply the best troubleshooting steps. To solve this error, you can also take help from our talented technicians. HP inkjet printer support team knows how to solve this type of issue.
Steps to fix HP printer error 59.F0
To solve this problem, you can also apply the given solutions. It will help to solve HP printer error 59.f0. To solve this error, you need to perform the given solutions without any delay.
Step 1. Reset the printer
To remove this error, you need to perform the resetting of your printing machine. For that, you have to reset the printer settings. And remove the surge protector from the device.
Step 2. Reset the ITB
You need to perform the task of resetting the ITB. Once you are done resetting your ITB, Then proceed to check the internal connections of ITB, such as the connection between ITB and a transfer-roller-disengagement sensor placed at connector J19 and the connection between ITB and DC controller PCA also called as connector J128. Read More: How To Turn HP Printer Offline to Online?
Step 3. Test the ITB
If the above steps fail to solve this error, then you should eliminate the ITB entirely and then test the ITB gear and the flag manually. Tp test the ITB, you can follow the given instructions.
- Move the gear and check for any fluctuation in the flag when you turn the white gear.
- If the flag is found to be damaged, then it is high time to replace the ITB.
- But what if the flag and ITB gear is working correctly? Check for the Sensor SR9. For this, you will have to follow the following steps to do the Manual Sensor test.
- Remove the ITB gear, locate the Sensor SR9 located inside the ITB cavity, and browse the control panel.
- Press the ‘Home’ button and then press the down arrow to highlight the diagnostics menu.
- Tap on the okay button and select the Manual Sensor Test and click OK.
- Verify inside the ITB cavity and release the SR9 flag and check the display for the sensor response when you press the flag. The sensor should toggle between 0 and 1. If the toggle does not appear, then you have to get the sensor repaired or replaced.
Comments
Post a Comment